Angle drills are compact and lightweight rotary machines and ideal for work in confined spaces where using a standard drill will not allow you to get into tight corners to add that all important fixing screw or fastener. These angle drills are ideal for use between joists and for building and assembling cabinets.
These Rotary only drills are supplied with NO Percussion (Impact) mode, they are used primarily for drilling all materials except masonry and concrete and are supplied with either Keyless or Keyed chucks.
Mixer drills are slow speed, high torque machines designed specifically for use with paddles when mixing materials such as paint,floor screed, epoxy and latex, artex,mortar and drywall compound. Mixer drills are also suitable for mixing small batches of sand and cement.
Dry diamond core drills are designed, with the right core bit, to give clean, rapid cut in brick and internal wall materials with virtually no making good. It is ideally suited for plumbers, electricians, kitchen fitters, heating and ventilating engineers and general builders. The machines use rotary action only which reduces noise and vibration. The harder the brick or the larger the diameter of the core drill, the slower the rpm. Faster rotational speed does not necessarily mean better penetration. Please note that unless specified they are not suitable for use on reinforced concrete or engineering brick.
These machines have been designed for use primarily in drywall installation although they are also suitable for a wide range of screw driving applications. They are able to drive drywall screws to a set depth time and time again and some models offer an option of collated screws which allows the user to use the machine single handed.
Impact wrenches are high torque drivers with excellent power-to-weight ratios and fitted with 1/2in or 3/4in drives for tightening or loosening nuts and bolts.
Perles only From £195.32
DeWalt only From £191.95
DeWalt only £137.94